little distractions


A little light on project updates lately because:
  1. had a baby
  2. house lost power in a storm and i had to move out for a few days
  3. same storm threw large branches around the yard, crushing fences and breaking off my gutter and fascia.


So I have been:
  1. Dandling said baby
  2. Cooling heels and watching football at a friend's house for a while
  3. Replacing fascia, putting banged-up gutter back into place
  4. Chainsawing up fallen tree-matter.
But even so I've made some progress - other updates to follow.



Comments

Post a Comment

Popular posts from this blog

forgery

Image
 Ronny and Matt from Church invited some youth to try simple forging.  Ronny brought an anvil and some know-how.  Matt brought a little propane forge. Starting from some simple rod stock, a couple guys each got to pound on the red hot metal: to make a stylish little letter-opener:  I got to hammer too, and made a wee "garlic cleaver": I didn't do much of the metal - i just supplied some dumb hammering while Ronny moved the work - but I was proud of the handle: I cut off 5" of an oak branch that had fallen during the recent storm, shaped it with a rasp, then burned it with a blowtorch to get the color.  I sealed it with a quick clear coat spray.  The handle only took about 90 minutes (mostly the rasp), and I was pleased with the comfort and color. I mounted it on the blade by drilling a hole in the wood (slightly undersized for the tang), heating up the metal to really hot, and shoving them together.  The hot metal burned its sha...
Read more

The way it goes

I wanted to install a ceiling fan where there was only a ceiling light.  No problem!  I've done this many times before - maybe 30-45 minutes is plenty. HAHAHAHAHHAHAHAHAHHAA! As so often happens in projects, this one snowballed and wound up taking over 3 hours .  Follow along with these easy-to-repeat steps and see if you can tell where the problem lies: Step 1 - Remove the old light fixture finger screws for the glass bowl -- easy peasy. a screw or two holding the light housing to the junction box --  boy, this box is pretty wiggly. the wirenuts and ground wire connecting the light to the supply --  hot wire is off; all is well. Pro tip: It's a good idea to turn off the breaker, but chances are good your breakers are labeled incomprehensibly or are outright lies.  What I do is turn off the room switch and then quickly tap the hot wire with a finger to see if i get zapped.  I didn't this time! Surprise!  A pleasant surprise!...
Read more

mac -> arduino -> pi -> perfboard -> regulators -> servos

Image
This is a continuation of the small electronics / microcontroller project mentioned earlier in http://evandaprojects.blogspot.com/2017/11/robot-claw-prototype.html http://evandaprojects.blogspot.com/2017/11/first-pi-project.html http://evandaprojects.blogspot.com/2017/11/pi-prj-1-update-1.html But I've shifted gears and instead of a gantry-like ASRS, I was thinking of trying to make a robot arm. Structure As usual, I will use a lot of what i have on-hand, and so instead of fancy aluminum t-channel structural members, I'll use 2x4s that I'll rip into thin slabs. I figured it'd need to rotate.  I didn't have any lazy susan bearings, so i stuck some casters on a board.  It could be smoother. Arms will get mounted to it using pieces of melamine (left over from the concrete casting)  and bolts (reclaimed from a bench swing that got crushed by a fallen tree). I made sprockets or gears - we'll see how i use them - with timing belt and plywoo...
Read more